Fluidized bed vertical tube furnace

Model：KJ-T1200-V60

Description：

KJ-T1200-V60 is a fluidized bed vertical tube furnace, which is specially designed for CVD experiments of powder surface deposition. The furnace tube is a high-purity quartz special-shaped tube. There is a porous quartz plate embedded in the furnace tube.

Email：web@kejiafurnace.com

Leave A Message

Online Chat

IntroductionFeaturesTechnical ParametersInquiryCustomer Case

Introduction：
KJ-T1200-V60 is a fluidized bed vertical tube furnace, which is specially designed for CVD experiments of powder surface deposition. The furnace tube is a high-purity quartz special-shaped tube. There is a porous quartz plate embedded in the furnace tube. The aperture of the quartz plate is 0.2 mm. The powder can be placed on the porous quartz plate, and the gas can be introduced from the lower end of the furnace tube, and the sample particles can be suspended in the heating area through the porous quartz plate for deposition experiments.

features

The furnace tube is a high-purity quartz tube. High temperature resistance, good thermal stability and good light transmittance. Wear-resistant and cost-effective.
The furnace tube is equipped with a quartz boat embedded with a porous quartz plate.
The aperture of the quartz plate can be individually customized. The powder can be placed on the porous quartz plate, and the gas can be introduced from the lower end of the furnace tube, and the sample particles can be suspended in the heating area throu
Note: When the sample particles are suspended by passing in gas, the particles may pass through the heating zone because the gas flow rate is too large, so the gas flow rate should be adjusted according to the size of the particles during the experiment.

Technical Parameters

Vertical tube furnace part
Model	KJ-T1200-V60
Heating zone length	440mm
Furnace tube size	Φ60*1000mm
Furnace tube material	High-purity quartz tube with built-in 0.2mm quartz porous plate (customized)
working temperature	≦1100℃
max.temperature	1200℃
Temperature measuring element	K-type thermocouple temperature measurement
Temperature Control System	Intelligent 30-segment PID microcomputer programmable automatic control and automatic tuning function
Temperature control accuracy	±1℃
Temperature control protection	With over temperature protection function
Heating rate	0-20ºC/min
Heating element	Alloy resistance wire
Operating Voltage	AC 220V Single phase 50HZ
Maximum power	4KW
Furnace material	Using polycrystalline fiber furnace material, the material has good thermal insulation performance, high reflectivity and balanced temperature field
Flange	Stainless steel vacuum flange for easy disassembly
Sealing system	The furnace tube and the flange are extruded and sealed by an O-ring, which is easy to remove, can be removed repeatedly, and has good air tightness.
Fluidized area	1. The reaction gas passes through the reaction zone uniformly 2. The solid particles are suspended in the heating zone by the gas introduced 3. The furnace body is designed to be open. When the experiment is over, the furnace body can be opened, the quartz tube can be taken out, and the reacted particles can be taken out. Note: When passing the gas to suspend the sample particles, the gas flow may cause the particles to pass through the heating area, so the gas flow should be adjusted according to the size of the particles during the experiment.
pressure gauge	The outlet is a mechanical pressure gauge
shell structure	Double shell structure with air cooling system, open type
Furnace structure	vertical structure
furnace shell temperature	≤45℃
Flowmeter	Nitrogen float flow meter, which can adjust the gas flow to make the material fluidized
Standard accessories	1 pair of high sealing flanges, 1 quartz tube, 4 sealing rings, 1 pair of high temperature gloves, 1 crucible hook, 1 hexagonal wrench for dismantling the flange, 1 copy of the warranty card manual
Electrical Certification	EU CE certification ISO9001 quality system certification
after-sale warranty	12 months (excluding wearing parts)

Quality assurance and after-sales service commitment:

1. Our company provides a one-year warranty service for the supplied equipment (except for wearing parts). During the warranty period, any equipment damage or failure caused by the equipment quality will be repaired free of charge. After the warranty period expires, life-long, high-quality maintenance services are still provided.

2.In the event of equipment failure during the use of the equipment, the user can notify the maintenance needs by telephone, written, fax, email or other means, and our company will make a solution as soon as possible to ensure the normal operation of the equipment.

3. Our company provides free equipment operation training and simple troubleshooting and maintenance training. To ensure that the user can skillfully carry out standardized and safe operation of the product, can deal with general faults and routine maintenance and maintenance of the equipment, and ensure the normal use of the equipment.

4. Our company's technicians can provide door-to-door service (product installation and debugging, whole machine maintenance, technical explanation and operation guidance, etc.). Our company's technical consultants can answer customers' questions about technology and standard specifications and provide technical guidance at any time.

5. The company can provide transportation services, and the packaging methods are in accordance with standard safety packaging. Complete random technical information (user manual, warranty manual, related information and accessories, random tools, etc.).

6. All products of our company have EU CE quality certification.

Pre:Vertical tube furnace equipment（+Water cooler）

Next:Special equipment for nanowire growth